Subscribe

Blue-light special: three scientists share Nobel for physics for work on LEDs (+video)

The trio's collective breakthroughs have spawned light bulbs that last for a decade. Blue LEDs have made possible flat-panel, full-color computer monitors and TV screens, and are used in lasers for Blu-ray.

  • close
    Meijo University Prof. Isamu Akasaki, center, won the Nobel Prize in physics Tuesday, together with Nagoya University Prof. Hiroshi Amano and Shuji Nakamura of the University of California at Santa Barbara.The trio won the Nobel for the invention of blue light-emitting diodes — a new energy efficient and environment-friendly light source.
    Kyodo News/AP
    View Caption
  • About video ads
    View Caption
of

Three researchers, one from the United States and two from Japan, have been awarded the 2014 Nobel Prize in Physics for their roles in developing light-emitting diodes that shine blue – for decades, a Holy Grail in the field of photonics.

The trio's collective breakthroughs have spawned light bulbs that last for a decade and consume less than 20 percent of the power incandescent bulbs use to provide the same amount of light. Blue LEDs have made possible today's flat-panel, full-color computer monitors and TV screens, and are used in lasers for Blu-ray DVD players and higher density data storage on computer DVDs. The technology also is being incorporated into water purifiers, which use ultraviolet light to kill bacteria and viruses in water.

Globally, LED lights, combined with batteries and solar panels to charge them, could allow more than 1 billion people to move from kerosene lamps – or no lamps at all – to electric lighting without using local gas or diesel generators or regional power plants to provide it.

Unlike many Nobel Prizes, the rationale for this year's selection is relatively easy to grasp, notes Fredrick Dylla, executive director of the American Institute of Physics (AIP) in Washington.

People "can walk into a hardware store and see white LED lights that are still rather expensive, but have labels that say they won't burn out for 10 years and the cost of operating" is about one-tenth that of an incandescent bulb, he says, dubbing it lighting for the 21st century.

What's so big about blue? It was the last holdout on the path to using LEDs to provide white light. Blue, or more properly cyan, is one of three primary colors, along with magenta and yellow. In pigments for paint, which selectively reflect light, an equal blend of the three yields black. With light itself, however, an equal blend of the three yields white. In both cases, all of the other colors in the visible spectrum result from a judicious mix of the primary colors.

Between the end of World War II and the mid-1950s, researchers were uncovering the mechanism in semiconductors that allowed some of them to emit light when subjected to an electric current. The first LEDs out of the gate in the early 1960s operated at infrared wavelengths as well as red. In addition, yellow became common. 

But for lighting, blue and green wouldn't emerge commercially until the mid-1990s. The first white LEDs started appearing in computer screens around the middle of the 2000s.

This year's winners – Isamu Akasaki, with Meijo University and Nagoya University, Hiroshi Amano, of Nagoya University, and Shuji Nakamura, with the University of California at Santa Barbara – are sharing the $1.1 million prize for "very carefully choosing materials" and the techniques for incorporating them into light-emitting diodes "into configurations that work, then work for a reasonable period of time, and at a reasonable brightness and efficiency," Dr. Dylla explains.

"This was a journey" 30 years in the making, not the culmination of a single eureka moment, he adds.

Indeed, the LED light bulbs on the market today have yet to realize the goal of blending light from red, blue, and green LEDs. Although the light from white LEDs is used directly in flashlights and some floodlights, the most cost-effective way of getting LED room lighting to market has been to harness the light from blue LEDs to tickle a layer of phosphor inside the bulb. The phosphor has been formulated to yield the right amount of red and green light as it glows to make white light when it combines with the light from the blue LED.

Red, green, and blue LEDs are used in computer displays and smart-phone screens, but these applications require sophisticated circuitry to control the production of the full range of colors, especially when the screen is displaying videos.

The three researchers will receive their award at a ceremony in Stockholm on Dec. 10.

About these ads
Sponsored Content by LockerDome
 
 
Make a Difference
Inspired? Here are some ways to make a difference on this issue.
FREE Newsletters
Get the Monitor stories you care about delivered to your inbox.
 

We want to hear, did we miss an angle we should have covered? Should we come back to this topic? Or just give us a rating for this story. We want to hear from you.

Loading...

Loading...

Loading...

Save for later

Save
Cancel

Saved ( of items)

This item has been saved to read later from any device.
Access saved items through your user name at the top of the page.

View Saved Items

OK

Failed to save

You reached the limit of 20 saved items.
Please visit following link to manage you saved items.

View Saved Items

OK

Failed to save

You have already saved this item.

View Saved Items

OK