Skip to: Content
Skip to: Site Navigation
Skip to: Search


New networks take nature’s pulse

Outdoor advances such as low-power chips and tiny solar panels let computers get a breath of fresh air.

(Page 2 of 2)



The sensors measure soil moisture every 10 minutes and relay that information to the eKo device, which, in turn, transmits the information via wireless radio signals to and from other nodes in the vineyard. The information travels from the wireless sensor network in the vineyard to an Internet gateway and then to Holler’s office computer.

Skip to next paragraph

“The technology works, is robust, and puts data on the Internet quickly,” says Holler.

The sensor network has a self-organizing feature, meaning each network node talks to the nearest node with the strongest signal. If one node fails, the next strongest signal is picked up so the network keeps working. He says the information from the sensor network has let him use less water, stress the vines less, irrigate properly, and get better quality grapes.

To date, sensor networks are being used with high-value crops like fruits, nuts, and nursery plants. A recent survey of 36 vintners and farmers in the US found that more than half already use wireless sensors and about a third plan to get new applications over the next 18 months, according to ON World, a wireless research company in San Diego. Uses include monitoring soil temperature and moisture, sensing how fertilizers dissipate, and detecting pests or mold.

Because sensor networks are wireless, they are being put in far-flung places, including on volcanoes. Matt Welsh, associate professor of computer science at Harvard University’s Sensor Networks Laboratory in Cambridge, Mass., has put test networks on several volcanoes in Ecuador to detect seismic and acoustic signals so scientists can better understand how volcanoes work.

One of the challenges was the tough physical landscape. The volcanoes regularly shook or spewed rock – at one time shearing off an equipment antenna. The sensor network was able to collect mounds of data that told researchers what the volcano was doing.

“The things we are doing with volcanoes could apply to collecting high-resolution signals such as on a bridge or during an earthquake,” says Mr. Welsh. “There are potential commercial applications in oil and gas field exploration.”

He sees much broader uses for wireless sensor networks. “The technology is on the brink of getting widespread adoption,” he says.

In a few years, sensor networks could be in the same place the Internet is now, Welsh says.

“Sensor networks could be enmeshed in the fabric of the world to do monitoring in all kinds of places where you can’t do it now.”

New sensors tap power from trees
The thought of trekking across Antarctica or through an expansive vineyard to change a wireless sensor’s batteries isn’t too appealing. To avoid such trips, researchers are looking to harness the energy of everything from building vibrations to tree chemistry to keep their devices running as long a possible.

“There is an emerging trend toward power harvesting,” says Sam Lucero, an analyst at ABI Research in Scottsdale, Ariz.

The Massachusetts Institute of Technology in Cambridge, Mass., has tapped trees to power sensors that could predict and track forest fires and potentially detect threats such as radioactive materials at US borders.

Each sensor has a battery that can be slowly recharged using the small amount of electricity generated by a chemical imbalance between the tree and the soil in which it grows.

The wireless sensor network is being developed by Voltree Power of Canton, Mass., and is to be tested this spring on a 10-acre lot provided by the US Forest Service.

Germany’s EnOcean makes wireless sensors without batteries. The sensors are powered by their surroundings such as energy from vibrations, rotations, pressure, light, and temperature changes. For example, vibrations can be converted into electrical energy by flexing crystals that have a property known as piezoelectricity.